Sharp estimates in terms of moduli of smoothness for compound cubature rules

Summary In 1980 Dahmen-DeVore-Scherer introduced a modulus of continuity which turns out to reflect invariance properties of compound cubature rules effectively. Accordingly, sharp error bounds are derived, the existence of relevant counterexamples being a consequence of a quantitative resonance principle, established previously.     

含铱配合物的聚对苯类电磷光聚合物

通过Suzuki聚合法合成了以聚对苯为主链的含铱配合物的电磷光共轭聚合物。部分苯环单元被β-二酮结尾的烷氧基链取代,进而与2-苯基吡啶配位形成悬垂的铱配合物侧链。宽带隙的聚对苯主链使主体与客体的能级匹配,从而有利于能量的转移。铱配合物通过长β-二酮结尾的烷氧基链悬挂在聚对苯的侧链上提高了聚合物的溶解性,有利于器件的制作。另外,由于连在氧原子上的β-二酮具有较大的旋转自由度,增大了β-二酮的反应活性有利于配位反应的进行。聚合物的EL光谱只显示客体铱配合物的发射,主体的发射已被完全猝灭。这表明聚合物主体和铱配合物客体之间发生了有效的能量转移。PPPIrPPy2聚合物发光器件的EL光谱发光波长为525nm,最大外量子效率为2.6%。     

SN方法粒子输运计算程序自动建模关键技术问题研究

在充分调研和分析SN方法粒子输运计算程序自动建模方法的基础上，对建模过程中的模型文件格式识别、属性编辑、空腔处理及自动划分离散网格等关键技术问题进行了研究，并提出了合理可行的解决方法。通过对SNAM程序建模部分功能测试，验证了这些方法的正确性和有效性。This paper presents two approaches to enhance the geometry modeling ability of SN particle transport simulation codes and focus on the key issues that lie in the processing from CAD model to SN code geometry model, e.g. CAD file format support, void modeling, mesh generation and model-editing. SNAM （SN Automatic Modeling system） has been developed as an interface code between commercial CAD software and SN particle transport simmulation codes. The testing results have shown that the algorithm and implementation used in SNAM are efficient and capable of all the necessary processing from CAD model to SN geometry model.     

A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.     

Electron spin resonance of diluted solid solutions of MnO2 in Y2O3

Electron spin resonance spectra of Mn²⁺ in diluted solid solutions of MnO₂ in Y₂O₃ have been studied at room temperature for Mn concentrations between 0.20 and 2.00 mol%. Isolated Mn²⁺ ions in sites with two different symmetries were observed, as well as Mn²⁺ ions coupled by the exchange interaction. The relative concentration of isolated to coupled Mn²⁺ ions decreases with increasing manganese concentration. The results are consistent with the assumption that the manganese ions occupy preferentially the C₂ symmetry sites. A theoretical calculation based on this model yields an effective range of the exchange interaction between Mn²⁺ ions of 0.53 nm, of the same order as that of Mn²⁺ ions in CaO.     

CsI(Tl)晶体中反冲Cs和I核Quenching?Factor的测量

许多实验对用CsI(Tl)闪烁晶体作为探测器来寻找和探测暗物质的可行性进行了研究.本工作利用8MeV单能中子轰击CsI(Tl)晶体探测器来研究Cs核和I核的QuenchingFactor.在数据处理中,运用脉冲形状甄别(PSD)方法来分辨反冲核信号和本底信号.实验结果表明,在7keV到132keV的能区中,Quench ingFactor随着反冲核能量的减少而增加.在探测暗物质的实验中,这一性质对于CsI(Tl)晶体探测器获得较低的能量阈值是很有利的.     

The operational performance of the Yale ESTU

The ESTU began operation in 1988 and achieved the design voltage of 20 MV in 1990. Since that time, improvements to the gas handling system, negative ion injector, accelerator terminal and control system have greatly increased its capability and reliability. Today, the ESTU can efficiently produce an extensive assortment of stable ions at wide-ranging energies in support of low-energy nuclear physics.     

Charge transport in a polypeptide chain

Charge transport is one important example of signal transduction in a protein which is responsible for action at a distance, and is a fundamental process in biochemical action. A model is presented in which electronic effects interact with motional processes to combine into a bifunctional model. This model is investigated with new detailed molecular dynamics calculations and successfully explains such action at a distance. Received 1st February 2002 / Received in final form 26 May 2002 Published online 13 September 2002     

Syntactic characterization of closure under connected limits

Summary We give a syntactic characterization of (finitary) theories whose categories of models are closed under the formation of connected limits (respectively the formation of pullbacks and substructures) in the category of all structures. They are also those theories whose consistent extensions by new atomic facts admit in each component an initial structure (respectively an initial term structure), and also thoseT for whichM(T) is locally finitely multi-presentable in a canonical way. We also show that these two properties of theories are nonuniform.     

静磁场伴随有静电场存在

阐述检测物体是否产生了电场的方法；通过实际检测证实立方体永磁体既产生了负静电场，也产生了正静电场，并测定了具体的场强．